Key Features
-
Swivel Coulters or CCR: Choice of
spring loaded Swivel Residue Coulters or CCR
-
Ripper Shank: Reset on the Go Shank
or Toggle Trip Shank trail and are in line with the residue
cutting coulters
-
Row Tillage Components:
Choice of various Row Tillage Components are mounted
rearward of the Shank on a separate Tool Bar that floats
independent of the main Tool Bar on Parallel Linkages.
Row tillage
components remain in the soil when Shank trips.
Additional down
pressure can be applied to the tillage components with
spring adjustment in the Parallel Linkages. Pneumatic Press
Wheels can be substituted in lieu of Row Tillage components
for sub soil no till applications
-
Units equipped with Swivel Coulters come
equipped with one pair of screw type adjustable gauge
wheels on six and eight row implements and two pair on
twelve and 16 row implements.
Additional gauge wheels may be
required for additional flotation on twelve or 16 row
implements that come equipped with Swivel
Coulters. Units equipped with CCR in
lieu of Swivel Coulters do not come equipped
with Gauge Wheels. The CCR functions as Gauge
Wheels. However, in some conventionally tilled dry,
sandy, loamy conditions, rear mounted Gauge Wheels may be
required to prevent the CCR from pushing soil.
-
Parking stands are standard
-
A complete line of Accessories (Gauge Wheels, Planter
Supporting Lift Assist Wheels, Planter attaching Reach Arms,
Helper Wheels, Row Markers, Row Cleaners) is available to complete the
unit for almost any field application.
Specifications
-
Hitches
Hitch Type
|
4(36,38,40) Rigid |
6(30) Rigid |
6(36,38) Rigid |
6(40)/8(30)
Rigid |
8(36,38,40) Stack fold |
12(30,36,38) 12(40)/16(30) Stack fold |
CAT II-3 PT |
X |
|
|
|
|
|
CAT II-QC |
X |
|
|
|
|
|
CATIII-3 PT |
X |
X |
X |
X |
X |
X |
CAT III-QC |
X |
X |
X |
X |
X |
X |
CAT III-NQC |
X |
X |
X |
X |
X |
X |
CAT IV-NQC |
|
|
X |
X |
|
X |
-
Tool Bars
- 4x7 inch front hitch bar, 7x7 inch mail Tool Bar
- 2 1/2 inch for mounting Row Tillage components
-
Swivel Residue Cutting Coulters
- 3/16 inch x 20 inch Dura Flute
- 1000 Pounds down pressure
- Four bolt, hub maintenance free, tri-ply sealed
bearing
-
Shanks: (Reset on the Go or Toggle Trip)
- Reset on the Go with lifting the impement
- Simple mechanical trip requires stopping and lifting
the implement to reset
- One inch width
- High-strength, abrasion resistant steel
- Wear shin protected
- Reset on the Go shanks with 6000 pounds of trip
force
- Up to 18" subsoiling depth
-
Row Tillage Components
- Prepares the soil at shank depths of 12" to 18"
- Parallel link connection allows floatation
independent of the main tool bar. Row Tillage
Components remain in the soil when the shank trips
- Down pressure springs in the Parrallel Linkages
provide foe varying down pressure
- Tillage coulters and press wheels are anle
adjustable from 0 to 90 degrees
-
Cover Crop Roller(Patent pending)
- Rolls down the cover crop in direction of travel
while cutting residue, allowing shanks to operate
without dragging at a depth reange of 12" to 18"
- Enhances moisture retention and weed suppression
- 22" diameter, 1/4" thick, hardened allow steel
blades. Mounted in halves for ease of replacement
- 10 3/4" diameter roller
Benefits
-
Saves fuel, time, wear on equipment, and dollars by
eliminating several trips over the field.
-
One trip till and plant is accomplished when used with
planter attaching Lift Assist Wheels.
-
Saves moisture.
-
Improves soil.
-
Reduces erosion.
|